I bought a 3D printer zeepro and transported to Brazil, and during the trip the belt was broken or loosed and I do not really know how to fix it. Check the photos below. I would like to know if anyone teach me or have the tutorial how to fix it because I noticed that the support in the zeepro site is off.
How can I fix the belt?
Here is a PDF of the zim support site before it went offline. Sorry for the large size it has a bunch of pictures and I haven’t bothered compressing it yet.
https://drive.google.com/open?id=0B7yx2o92dvAPTmxhTXlIa25YeFE
Hi
I think the pdf file is corrupted, you can check and send again?
Thanks for help me.
Sorry about that. Its fine on my computer but for some reason if its downloaded from google drive its corrupt.
I’m not sure how to fix the corruption on google drive so I just printed the original then scanned it. This also made it a lot smaller. Let me know if this works (I tested it on my work computer and it shows up)
https://drive.google.com/open?id=0B7yx2o92dvAPRjc5QU5BLU9JNlU
link is still not working
I don’t know what was wrong with the link but I took pictures of each page and upload the pictures since it wouldn’t let me upload the pdf. Also found what was corrupt in the original file. Pg 2 is missing hopefully it wasn’t anything important.
Anyone have schematic diagram of the zeepro on tits hardware I want to put an aftermarket heated bed. thank you.
Take a look at this post. Create your own heated printbed!
There are some wiring diagrams there I used to attach a heated bed from Amazon to my printer.